It’s pleasurable and straightforward to lighten your wood stain, but there are a few different approaches you may take. Here are a few of the most frequent methods for lightening the stain on your woodwork to obtain a polished, sophisticated look that will endure the lifespan of your workpiece. When working with wood stains, remember to use the required personal safety equipment and keep your workstation well-ventilated.
Bleaching Your Wood
Do you want to know how to bleach discolored wood to make it lighter? This is one of the simplest methods to make your wood look lighter. Before you begin, make sure you have gloves, goggles, a tarp, and sufficient ventilation in your workspace. A chemical wood stripper, wood bleach, a paint scraper, fine-grit sandpaper, hot and cold water, and a paintbrush are all additional items you’ll need. Oh! Don’t forget to cover your workplace with a tarp so that none of your items are bleached.
Strip Your Wood’s Surface
If you’ve owned your workpiece for a long time, it’s likely to have a protective covering of polyurethane or varnish on its surface. If you’re going to bleach this bad boy, you’ll need first to remove the surface layer. How are we going to do this? The only way to get all of it done at once is to use a wood stripper, so open up your tin of wood stripped and dip your brush right in.
Remove the Stripped Coating
Now comes the time when things get a little messy. It’s your responsibility to scrape the residue from the surface of your workpiece once your wood stripper has converted the surface covering into something that resembles snakeskin. To prevent harming the grain of your workpiece, experienced artisans advocate using a plastic wood scraper, so once you have one, start scraping the residue from the wood’s surface.
Look for any color differences on the workpiece’s surface once you’ve removed most of the coating. Get in there with your scraper and remove any darker stains on your surface. Once all of the polyurethane or varnish has been removed, the surface of your workpiece should be homogeneous in color. Allow a few minutes for the workpiece to breathe before going on to the next phase in the procedure.
Prepare Your Wood Bleach
Remember how we mentioned you’d need a bucket for this? Get it for me. Once you have your bucket, pour the wood bleach into it, but make sure you’re wearing your goggles and gloves and that all of the windows of your workplace are open.
Why? Wood bleach is a potent substance, and breathing its vapors can cause mild to severe irritation. Make sure you follow the guidelines on the box after it’s in the bucket. Some manufacturers advocate diluting the consistency of their wood bleach with water or their solution, while others may tell you to mix it up a little.
Apply Your Wood Bleach
Now comes the moment you’ve most likely been anticipating. It’s time to give your board a good cleaning with the wood bleach. The preparation of the surface, like with most surface coatings, takes the majority of the work rather than the application of the coating itself.Dip your brush (ideally one with natural bristles) into the wood bleach that has now been combined. Apply a slight bleach coating to your workpiece and try to spread the bleach around the board’s surface uniformly. You might use a small to medium-sized mop to speed up the procedure if you’re dealing with an extensive project.
Apply White Vinegar to the Surface
After waiting the recommended 30 minutes, apply some white vinegar to the workpiece’s surface. Pour some white vinegar into a dish or a small bucket, then mix it with water. Allow a few minutes for the mixture to set before removing it with a moist cloth, ideally soaked in warm water, from the surface of the wood. Before moving on to the following stage, make sure the wood bleach and white vinegar have been completely removed from the workpiece.
Sand Your Workpiece and Resurface It
Isn’t the job done? It might be. However, we recommend taking some extra precautions to guarantee that you get the most enjoyment and longevity out of your project. Because you removed the protective covering to bleach the surface of your workpiece, it’s a good idea to restore it before moisture, insects, or high heat harm the surface.
Using Steel Wool
This is the simplest method if you’re wondering how to lighten coloured wood using steel wool. Steel wool is valuable for removing stubborn stains from pots and pans. It’s a great way to brighten up your wooden surfaces. Steel wool (the good variety), mineral spirits, warm water, gloves, goggles, and a clean towel are all required for this approach. Even if you’re not working with anything particularly hazardous, make sure your workspace is well-ventilated before you begin.
Use the Steel Wool on the Wood
Didn’t you think we’d get used to it? Nope. With this strategy, we’re going right into action. Begin by immersing your steel wool in warm water until thoroughly saturated, then ringing it out until you have a useable quantity of water left behind. When you’re all set to go, begin by scrubbing the surface of your workpiece with the steel wool, being sure to apply uniform pressure throughout the surface of your workpiece.
Mineral Spirits should be used on the exposed surface.
Now comes the exciting part. Get out your mineral spirits and dab some on the surface of your workpiece or the cloth you’ve been using thus far. After applying your spirits, rub them over the surface of your workpiece at a uniform rate. You should be able to see its effect on the wood stain in real-time, as you rub the spirits into the wood, as it raises and changes the tone of the stain.